Deck permits in
Unincorporated Summit County.
Kimball Junction, Snyderville and Silver Summit are unincorporated. The county permits them — and the county's numbers are nothing like the valley's.
Do you need a permit to build a deck in unincorporated Summit County?
Yes, and you apply to Summit County, not to a city. Kimball Junction, Snyderville and Silver Summit are unincorporated, so there is no city building department to apply to — the Summit County Building Department issues the permit, reviews the plans and does the inspections. Park City, which they adjoin, is a separate jurisdiction with its own rules.
Source: Summit County IRC Project Design Criteria R301.2(1), effective 1 July 2026. Read from the city’s own document and verified .
The numbers your drawings have to use
These come straight from the city’s published design criteria. They are what a plan reviewer checks a deck against.
| Criterion | Value |
|---|---|
| Frost line depth | 36 inches |
| Winter design temperature | −7°F |
| Air freezing index | 2500 |
| Mean annual temperature | 42°F |
| Ground snow load | Utah Ground Snow Load Map, per site |
| Wind speed | 115 mph |
| Topographic effects / special wind region | No / No |
| Seismic design category | D |
| Weathering | Severe |
| Ice barrier underlayment | Required |
Look at the cold numbers together. An air freezing index of 2500 against Salt Lake City’s 1500, a winter design temperature of −7°F against 8°F, and a frost line of 36 inches against 30. That is the same reason in three forms: the ground here freezes deeper and for longer, so every footing goes six inches deeper than an identical deck in the valley.
Which places this covers
Kimball Junction, Snyderville and Silver Summit are unincorporated communities within the Snyderville Basin. They have addresses and names but no municipal building department, so Summit County is the authority having jurisdiction.
This is the single most common administrative mistake on a Basin deck: a Park City postal address does not mean Park City issues the permit. Confirm the jurisdiction from the parcel, not the mailing address.
Why a valley deck detail does not transfer
The county’s own criteria put the frost line at 36 inches. A deck designed to a Salt Lake County drawing has footings six inches too shallow — which is not a paperwork problem, it is a deck that heaves.
Ground snow load is not published as a single figure; the county sends you to the Utah Ground Snow Load Map for the site. Elevation across the Basin varies enough that this genuinely matters. Wind is a straightforward 115 mph with no topographic effects and no special wind region, which makes it simpler than Provo.
Who to talk to at the city
Summit County Building Department — Building Department. The county publishes its building checklists and detail sheets online, and its design criteria are effective 1 July 2026.
Check the parcel, not the postcode. Properties in the Snyderville Basin often carry a Park City mailing address while sitting in unincorporated Summit County. The two have different codes, different portals and different reviewers, and submitting to the wrong one means starting again.
We handle this part
Confirming the jurisdiction from the parcel, footings to the county’s 36-inch frost line, the site snow load from the USU map, drawings, submission and inspections — in our quote, not an extra.
